DIY analog synth project (Ad-vantage 03 prototype Control Panel and Breadboard circuits tour)

Published on Jan 6, 2019 Adamski A.

“Hey guys just passing through with a run down of the Ad-vantage 03m protoype analog monophonic synthesizer, more for those who are newish to the channel.

As I mentioned im in need of a bit of advice with regards to grouping the circuits the best way possible, so any advice welcome this is my first ever electronics project.

Thank you.
Backing track

DIY analog synth Project ( A montage of recorded sounds Part 2 )

Published on Dec 3, 2018 Adamski A.

“Back on the attack with another bunch of patches I made on the Ad-vantage 03m protosynth circuits.
Maybe one day i’ll work out how to implement patch storage on this beast. Some sounds are dry and some run through my Lexicon MPX550 unit. Check out part one if you havn’t already done so here:” [posted here]

Adamski Ajull DIY analog synth project (A monatge of recorded sounds)

Published on May 21, 2018 Adamski A.

“Hey guys , I thought It would be worth sharing a small compilation of some sounds I have recorded from my protosynth circuit/s. I hope this gives those who are new to the channel a flavour of what the protosynth is capable of . (Thou to be honest I barely scratch the surface as there is so may sound sculpting possibilities
The specs are as follows

3 x

DIY analog synth project Steiner parker type VCF circuit (A new level of FATNESS !!)

Published on Mar 24, 2018 Adamski A.

“Hey guys , since the last Steiner parker filter video [posted here] , I still wasn’t quite satisfied….. So I have yet again given the circuit an upgrade to achieve an even steeper cutoff slope and deeper low end response. I aimed for somewhere between 18-24db per oct and at the same time retaining the very controlled resonance response.
More sound demos

DIY analog synth project (Steiner Parker "Type" VCF The Final Tweak)

Published on Nov 7, 2017 Adamski Ajull

“Hey guys back again with yet another modified Stiener Parker type 12db per oct VCF, this based on a mashup of Ken stone and Yves Ussons schematics.
I have increased the diode ladder from 10-12, and also the size of the capacitors in the ladder and also my own tailored trimming for keyboard tracking.
There is also a trimmerble diode pair in the resonance

DIY analogue synth project part 10i (Sound Examples Arp sequences)

Published on Sep 3, 2017 Adamski Ajull

“Hey guys I kind of skip a chapter here, my next sound examples video from part 10i was supposed to be strings and pads etc. Slight change of plan as im still in the process with that video. I have been tinkering again to get a good scaling on all three oscillators especially in the higher frequency range. Enjoy like, comment and subscribe 😉

Effects: