New ADDAC ADDAC216 Sum & Difference Eurorack Module

via ADDAC System

“There are two equal sections in this module labeled A and B.

This module is a peculiar type of mixer that instead of just summing two input signals (X & Y) it also allows the possibility to subtract the two signals.
It works both for audio and CV signals and hence the possibility to get the diference of two CVs or cancel the phase of two audio signals. The resulting signal,

ADDAC603 VC Triple Bandpass Filter – Step Through

Published on Dec 4, 2019 ADDAC System

“Here’s the Overview video for ADDAC603 VC Triple Bandpass Filter

At ADDAC we’ve been in love with Bandpass Filters for a long time! We use them in several different ways but mostly as dynamic equalisers at the end of an audio chain for ever-changing timbral qualities with slow modulations on frequency and volume. Slightly or drastically changing the

New ADDAC603 VC Triple Bandpass Filter

Published on Nov 30, 2019 ADDAC System

“Here’s the Overview video for ADDAC603 VC Triple Bandpass Filter

At ADDAC we’ve been in love with Bandpass Filters for a long time! We use them in several different ways but mostly as dynamic equalisers at the end of an audio chain for ever-changing timbral qualities with slow modulations on frequency and volume. Slightly or drastically changing the

ADDAC215 Dual S&H+ Sample Rate Reducer

Published on Nov 28, 2019 ADDAC System

“This new module should not be judged by it’s size, at 6hp it’s packed with features.

At it’s core it features a noise source and two precision Sample & Holds with 0.01% of maximum deviation from the Input which allows for quantized signals to be sent through without any noticeable detuning or the typical voltage drops over time.

The Sample & Hold

ADDAC215 Dual S&H+ Basic Introduction

Published on Nov 27, 2019 ADDAC System

You can find details on the ADDAC215 here.

“This new module should not be judged by it’s size, at 6hp it’s packed with features.

At it’s core it features a noise source and two precision Sample & Holds with 0.01% of maximum deviation from the Input which allows for quantized signals to be sent through without any noticeable detuning or the typical

Introducing ADDAC105 4 Voice Cluster – Sound examples

Published on Nov 27, 2019 ADDAC System

You can find an overview and details on ADDAC System’s new ADDAC105 4 Voice Cluster here.

ADDAC Introduces System 4 Voice Cluster

ADDAC System has introduced the ADDAC System 4 Voice Cluster Eurorack module – a four voice square oscillator with several modulation options including a VCA, an FM switch and a slew decay for the incoming trigger input.… Read More ADDAC Introduces System 4 Voice Cluster

Introducing the ADDAC105 4 Voice Cluster – First Audio Preview

Published on Nov 20, 2019 ADDAC System

“Following our ADDAC103 T-Networks this new module is inspired by it’s simplicity. This is a 4 voice Square Oscillator with VCA, FM switch and a slew decay for the incoming Trigger IN. All voices are then sent through a Multimode Filter.

Each voice has it’s own VCA input where any input is accepted (Trigger, Gate, CV) The [DECAY] controls the slew decay

New ADDAC215 Dual S&H+ & ADDAC104 VC T-Networks Eurorack Modules

ADDAC215 Dual S&H+

“This new module should not be judged by it’s size, at 6hp it’s packed with features.

At it’s core it features a noise source and two precision Sample & Holds with 0.01% of maximum deviation from the Input which allows for quantized signals to be sent through without any noticeable detuning or the typical voltage drops over time.

The Sample & Hold sections can also be used

New ADDAC System 103 T-Networks

Published on Jun 20, 2019 DivKidVideo

“Here we have the vintage, analog / analogue T bridge, twin T (it get called multiple things) circuits that make up some classic circuits in well known drum machine and electronic percussion of yesteryear. This circuit has been tweaked and modded and brought into Eurorack as a simple 4 voice percussion module as the T-Networks from ADDAC System. It can be