Here’s a quick demo of the new Pittsburgh Modular Electronic Sequence Designer, a powerful step sequencer for Eurorack modular synths, from company head Richard Nicol.… Read More Pittsburgh Modular Electronic Sequence Designer Hands-On Demo
Polish maker Polyend has one special grid – expressive sensing meets powerful sequencing and recording. And now, combined with a dedicated synth made with Dreadbox, it starts to really come alive.
The first impression of Medusa, the new instrument shown last week at Superbooth, is a little bit of a Dreadbox synth tacked into a case with the grid sequencer from Polyend’s SEQ. But that’s really not what you’re getting here. For one thing, Polyend had a hand in the synth portion of this instrument, too, suggesting new architectural features. And for another, because every single parameter on the synth side can be played live and sequenced from the grid, you really get the sense of a complete, integrated instrument.
That’s not to say that SEQ, Polyend’s expansive sequencer product, doesn’t work well at these features, too. In fact, Medusa acts as a nice calling card / advertisement for what SEQ can do. But there’s something about immediately getting sound when you press into a space on the grid that makes a big difference.
And even before you start up the step sequencer, Medusa’s grid is irresistible to play. Each pad responds to x/y/z input, not just pressure. It’s sort of the opposite of the lifeless, on/off digital feeling of the monome – every continuous variation of the finger, every movement around the pad controls the sound. (Apologies to the monome, but that to me is a significant evolution – now that we’re accustomed to the once-radical grid interactions of the monome, we might well expect this kind of expressive dimension.)
Polyend have equipped that grid with a dedicated display, and mapped every parameter from the synth. So you can play live, you can record those performances, or you can increment through steps and play or program detailed changes as steps, then play back and jam.
Of course, the other advantage of an integrated instrument is, you don’t have the bandwidth problems of MIDI. The internal architecture is there both for synth and sequencer, so you can modulate everything as fast as you like. (Richard Devine was on hand to turn up the bpm knob really high to test that.)
The Medusa is planned for availability August/September 2018 at 999€.
That’s 999 including VAT and shipping, so figure even a bit less in USD.
And yeah, if you want to know my favorite thing from Superbooth – this is it. It seemed to be a crowd favorite, as well.
Here are the full planned, confirmed specs as provided to CDM – though Polyend hinted there may be more in the works by launch, too. (Dreadbox may have more to say about this, too; I only had time to talk to Polyend!)
64 customizable three-dimension-expressive pads for a controller/sequencer
Step, live, and incremental sequence modes
256 independent sequences and voice presets
Per-step sequencing of notes, parameter locks, or even entire synth voice presets
Assign X and Y pressure axis to any modulation parameter, per pad
Randomization of voice and sequence
OLED display with customizable user menus
The synth is a nice digital-analog hybrid – 3 + 3, analog + digital wavetable (and comes with its own separate OLED display):
Three analog oscillators with sync, four wave types per oscillator
Three wavetable oscillators
24dB Dreadbox analog multimode filter (2- or 4-pole lowpass, highpass)
Play modes: monophonic, paraphonic x 3, paraphonic x 6 (so you can route the digital oscillators through the analog filter, yes)
Frequency modulation for oscillators and filter
Noise generator with color shaping
Modulation + control:
5 independent LFOs, which you can route into almost anything
5 independent DADSR envelopes with looping and its own parameter assignment
Mixer for all seven analog/digital/noise voices
Separate volume control for headphone and main audio out
USB MIDI in + out and DIN MIDI in + out + thru
Here’s Piotr talking about it in a couple minutes to FACT:
Sound demo, from Bonedo:
The post Polyend’s Medusa is an expressive grid, powerful sequencer, and synth appeared first on CDM Create Digital Music.
What if you had all the modules you need to make techno and industrial in one rack? Meet Erica’s line of drum and synth modules. They seem to know their market.
Now, it’s meaningful this is coming from Erica. The Latvian-based company with some ex-Soviet Polivoks lineage has a knack for making simply mental boxes that bring that grimy, dirty industrial sound straight out of the actual post-Communist industrial landscape of Riga. If I had to sum up that user experience, it’d run something like this: turn knob, machine screams.
But that’s saying something. Making wild sounds intuitive is a feat. And Erica have earned their reputation by putting those sounds into boxes that are reliable, easy to understand, and deliver a punch without hitting the high end of the cost spectrum.
Running down these modules, you just have to keep nodding – yes, that’s what I want out of this module, and yes, that’s the sensible way to lay out these controls. I can’t really judge sound quality at a trade show, but the sound was good enough that it actually blew me away over the din of Superbooth, out of some small monitors – and that’s saying a lot. We’ll get to check out Erica’s crew at a club tonight here in Berlin, and this is one I think we’ll need to give a full review.
(Bonus: they’re also coming with the effects collaboration they built with Ninja Tune. I’m keen to see that, as well.)
I also think it’s totally reasonable to build systems around musical applications like techno. Plenty of modular instruments have morphed into particular configurations to make them musically accessible. And then since this is still patchable, you don’t have to make this sound like techno you’ve heard before – you can push that flexible sequencer and patch things together to bend something into your own genre and voice. Or, this being modular, you also have now a big line of components that could fill gaps in whatever setup you choose.
Here’s a look at those modules.
Sample slicing and triggering, WAV file (even imports CUE points), with assignable CV inputs. Actually, there’s nothing to say this has to be a drum module – it’s also a general-purpose sample slicer/module.
microSD for loading sounds.
Well, here’s your distortion. Three dedicated modes for each side, cascaded in series for extreme distortion. This is really the heart and soul of the Erica Techno System sound, and even if you didn’t get the rest of the line here, this one could be a must.
Built on the Spin FV-1 chip – a custom reverb platform – the dual FX has a set of custom mono and stereo effects from Erica’s in-house musician-madman KODEK.
It’s all about the bass – and here, those basslines will be more than a little acidic. Erica’s Acidbox proved how crazy their filters can be. It apparently inspired the filter here – so expect really aggressive, terror-inducing acid.
Full analogue circuit
BBD-based VCO detune emulation
Built in VCF and VCA decay envelope
External VCO FM and VCF cutoff CV inputs
Of course, what keeps this compact is, the sequencing all falls to the dedicated sequencer unit (or a sequencer module of your choice – Superbooth has had a lot of them).
Toms can easily be a throwaway, but here there was a lot of attention to detail. Toms has dedicated controls for low, mid, and high, and promises 909-inspired tom sounds. Erica says they built this in collaboration with e-licktronic – that’s the boutique/DIY maker who’s perhaps best known for their Roland clones and custom kits.
Erica are actually introducing three different hat/cymbal models. There’s an analog module (“A”) with accent and individual CV controls of everything, also made with e-licktronic. There’s a digital sample-based “D.” And there are sample-based cymbals (“Cymbals”).
It’s easy to overlook this one. But when you’re actually in the heat of the moment playing live, you need that ability to just reach over, twist a knob, and add in a particular part.
And the Drum Mixer looks just about perfect. It boasts vactrol-based compression to keep everything properly loud and intense without losing clarity, plus a stupidly easy setup for controlling compression and the various parts, with seven inputs and both main and aux outs.
Erica also plan a more compact 6-input “Lite” version of the same, and a 4-channel Stereo Mixer.
Oh yeah, and if you’re not into the black craze, they plan to release everything again in white.
Lastly, the sequencing here comes from the Erica Drum Sequencer. Announced in January, it debuted in March – but now it has some modules to sequence:
Features of that are numerous:
12x Accent outputs
1x CV/GATE track
2xLFO with independent or synced to the BPM frequency
Time signature per track
Pattern length per track
Shuffle per track
Probability per step
Retrigger per step
Instant pattern switching
Step/Tap record modes
16 Banks of 16 Patterns
Instant pattern switching
Midi sync in with start/stop
Firmware upgrade via MIDI SySex
The post Erica Synths made a modular techno system called Techno System appeared first on CDM Create Digital Music.
Novation today announced an update to the Circuit Synth Editor, adding full control over the Circuit Synth Engines. … Read More Novation Components Update Adds Circuit Patch Editing
Mode Machines shared this sneak preview of the Seq12, a MIDI Matrix Sequencer that offers one MIDI Input and three MIDI Outputs.… Read More Mode Machines Seq12 12-Track MIDI Matrix Sequencer
Switch is a four-input, four-output, voltage and gate controlled switching matrix, and tempo-controlled clock generator/selector.… Read More STG Soundlabs Intros Switch Eurorack Module
Both are powerful sequencers, designed to be able be used as the ‘brain’ of complex studio setups. … Read More Squarp Pyramid & Hermod Sequencer Hands-On Demo
The ARQ AR-48 is a drum machine, sequencer, synthesizer, looper, clip launcher, MIDI controller and live performance instrument – and looks a bit like a flying saucer. … Read More Zoom ARQ Aero Rhythm Trak AR-48 Review
It ran natively in MS-DOS, then died by the end of the 90s. But now it’s back: one of the greatest chip music trackers of all time has been cloned to run on modern machines.
FastTracker II will now run on Windows and Mac (and should run on Linux). The clone project started last year, but it seems to have picked up pace – a new set of binaries are out this week, and MIDI input support was added this month.
FastTracker II is a singular piece of software that helped define trackers, demoscene, and the music produced with it. If you’ve used it, I don’t really have to say more. If you haven’t, but you’ve used other trackers – even up to modern takes on the genre like Renoise – you’ve used software influenced by its design.
Like all trackers, the fundamental use of the tool is as a sequencer. But unlike other sequencer concepts – piano rolls which represent time visually like pianolas and music boxes do, multitrack recorders and DAWs modeled on mixers and tape, or notation views – the tracker is a natively computer-oriented tool. Its paradigm is simply about a vertical grid, with shortcuts for entry (represented as numerals) via the computer interface.
That makes trackers uncommonly quick via the computer interface. In the case of FastTracker II, you program every note and timbral change via mouse or keyboard shortcut, and it’s represented compactly in characters onscreen. FT2’s doubling up of mouse and keyboard shortcuts also makes it quick to learn and still quicker to use once you’ve mastered it.
In fact, firing up this build (in 64-bit on Windows 10, no less), I’m struck by how friendly and immediate it is. It’s not a bad introduction to the genre.
MIDI in is great, too, though MIDI out will “never” happen (in a message from the 13th of April).
But it’s kind of amazing this thing even exists. The clone is built in SDL, a cross-platform media library, the work of one Olav “8bitbubsy” Sørensen, who apparently got permission to do this. And it was never supposed to even happen. Heck, the thing was even buried with this note:
“FT2 has been put on hold indefinitely. […] If this was an ideal world, where there was infinite time and no need to make a living, there would definitely be a multiplatform Fasttracker3. Unfortunately this world is nothing like that.”
So, we may not live in an ideal world. But we live in a world where FT2 again runs on our machines. (Amiga fans, there’s also a ProTracker clone.)
Thanks to Nicolas Bougaïeff for this one, fresh off his Berghain debut. I want some new chip music from you, man.
And it’s … like the 90s are alive.
The post The 90s are alive, with a free, modern clone of FastTracker II appeared first on CDM Create Digital Music.
San Francisco based synth makers Zetaohm have released Firmware 18 for their 4 channel Eurorack sequencer FLXS1… Read More Zetaohm Updates FLXS1 Eurorack Sequencer